Our adjustable post base consistes of two square 6mm steel plates with 4 x Ø12.0 mm holes , one long nut and standard nut, and it has 50mm adjustable range from 110mm to 160mm. In order to avoid unintentional adjustment of the height, it is equipped with a lock nut which is screwed against the long nut, and thus prevents unintentional loosening. It is installed on virtually any substrate including other timbers, and it can support solid timbers to glue laminated beams or composite lumber.
Spesifikasi
√ Steel Grade: Q235 (equivalent to S235)
√ Boleh laras dari 110mm hingga 160mm
√ Suitable for posts up to 200mm
√ 4 x Ø12.0 mm holes on each of the plates
√ Pembinaan yang dikimpal sepenuhnya
√ Zinc plating (minimum 12μm）or hot dip galvanization (minimum 45μm）
| Perkara No. | Julat Boleh Laras Tinggi | Material | Plat Atas | Plat asas | Batang Berulir | Saiz Pos | Surface Threatment |
| FAPA100 | 110-160mm | Q235 (Equivalent to S235) | 100 x 100 x 6mm | 100 x 100 x 6mm | M16 | 100-200mm | Galvanisasi Hot Dip or Zinc Plating |
| FAPA130 | 100 x 100 x 6mm | 130 x 130 x 6mm | |||||
| FAPA160 | 100x 100 x 6mm | 160 x 160 x 6mm |
Fabmann membekalkan pelbagai jenis tapak tiang boleh laras serta penyokong stirrup psot, dan kami melaksanakan kawalan proses pengeluaran yang ketat untuk memastikan ketebalan bahan keluli, kimpalan dan rawatan permukaan logam memenuhi spesifikasi. Kami juga menyediakan penyelesaian fabrikasi tersuai, dan setiap kumpulan pengeluaran kami didokumenkan untuk kebolehkesanan penuh.
Cool tags: Tapak Pos Boleh Laras, Sauh Pos Boleh Laras, Sokongan Pos Boleh Laras
